|
|
|
|
|
|
FS4000
Fire control panel FS4000 is designed for operating with conventional automatic fire
detectors and manual all point. The panel is produced in four versions
Functional Data.
Individual indication for each zone status and filed for labeling;
Control over the fire alarm lines and thr controllable outputs for fault condition
(short circuit or interruption ) and automatic reset
Detection for a removed fire detector and automatic reset ; |
|
|
|
|
|
|
|
UniPOS - Intellect
Intelligent software solution in the field of security systems, ensuring: Reliable fire alarm system; Better protection of people and facilities; Quick and accurate judgment of the situation without leaving the working place; open structure providing upgrading options. |
|
|
|
|
|
|
|
|
IFS7000
Functional Data Fire Control Panel and all devices, connected in the loops are fully programmable; Two-wire data exchange between the Control Panel and the devices; Detection of Fault conditions: short circuit or loop interruption removed detector or swapped fire detectors, connection of the loop to the grounds; Signal loops (with optional branch lines) for connecting of fire detectors, input or output modules, adapters, modules for automatic extinguishing; One power loop for supplying of the executive devices (excluding IFS7002 with one signal loop); |
|
|
|
|
|
|
|
Sereies 3000 - FD 3010
Fixed Temperature Heat Detector The fire detector provides a reliable early warning of a Fire condition with or without smoke release, when the ambient temperature of the protected area reaches a fixed temperature threshold. It is available in two versions (A2S or BS) depending on the temperature threshold of activation in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal or high ambient temperature, with possible sudden changes. |
|
|
|
|
|
|
|
|
FS5200P
Power Supply Device The Power Supply Device FS 5200P is an autonomous power supply source of combined type with a backup battery and charging device. Its function is to provide continuous power supply for the devices in the signaling installations, fire alarm installations and automation of the fire alarm equipment. In case of a fault condition (no main supply, discharged or disconnected backup battery, burnt fuse) it switches its relay output. For a light signaling of the various conditions are used green and yellow LEDs located on the front panel. The device is in compliance with the European Standard EN54-4. |
|
|
|
|
|
|
|
FS5100
Adjustment of operating modes and parameters of each fire alarm line via
built-in keypad;
User-friendly dialogue menu for easy and convenient operation;
LCD display for visualization of check up modes and system setup;
LED indication for early warning of a break down or extreme conditions;
Ability to adress automatic fire detectors and manual call points in groups;
User-friendly test modes providing total control of the protected area; |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3020
Rate Of Rise Heat Detector The fire detector provides a reliable early warming of Fire condition with or without smoke release upon reaching a rate of rise of temperature, higher then the fixed temperature or upon reaching the maximum temperature threshold of the protected premises. It is available in two versions (A2SR or BR) depending on the temperature threshold of activation in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal ambient temperature, without sudden changes. |
|
|
|
|
|
|
|
|
|
Conventional Network Expansion
|
|
|
|
|
|
|
|
YKB02
Duct Smoke Detector Duct Smoke Detector YKB-02 is designed to detect the presence of smoke in airstream of ductwork sections or ventilating compartments, by means of the smoke detector mounted in it. Depending on type of the fire detector mounted in it, duct smoke detector is produced in two variants for Conventional Fire Alarm System (YKB-02K) and for Addressable Fire Alarm Systems (YKB-02A). In the device is mounted and automatic optical-smoke fire detector type FD8030 (for Conventional Systems) or type FD7130 (for Addressable Systems). In order to control the condition of the built-in fire detector, on the housing of the duct smoke detector is mounted an outboard LED Remote Indicator RI31. |
|
|
|
|
|
|
|
|
FS5200
Functional data Adjustment of operating modes and parameters of each fire alarm line via built-in keypad; LCD display with 4 lines for text inscribing for visualization of system checkup and setup modes; LED indication and sound signaling with built-in Text modes; Detecting activation of the automatic fire detectors and manual call points; Nonvolatile archive memory, saving the event type, and the moment of occurrence for up to256 events; |
|
|
|
|
|
|
|
Sereies 3000 - FD 3030
Optical-Smoke Fire Detector The fire detector provides as reliable early warning of a Fire condition responding to fixed threshold smoke concentration, detected in the protected premises. The construction of the optic chamber and the technology used in manufacturing of the screen, provides high level protection against entering dust particles and insects and operation under strong air flow. The smoke sensitivity is in accordance with the European Standard EN 54-7 |
|
|
|
|
|
|
|
|
|
Remote Access For Suscription Servicing
|
|
|
|
|
|
|
|
|
RS232 / 485
Interface Module The module is used for establishing the communication between the fire control panels and a personal computer or between fire control panels connected in a network. The Module is compatible with fire control panels FS5100 and FS5200. |
|
|
|
|
|
|
|
FS5200E
The fire extinguishing control Panel is designated for fire protection, monitoring and control of system for active extinguishing gas, powder, aerosol, water, etc. After processing the signals from the automatic fire detectors and/or manual keys, the panel gives commands to the executive devices for Extinguishing, sounders, lamps, air conditioning and ventilation devices, etc . . . |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3060
Combined Fire Detection The fire detector provides a reliable early warning of a Fire condition, responding to fixed threshold smoke concentration or rate of rise of the temperature or fixed temperature threshold detected in the protected premises. It combines the advantages of type FD 3020 and type FD3030 and it is an attractive option due to decreased expenses for supply and installation. The fire detector complies with the requirement of the European Standard EN 54-5 (temperature class A2R) and EN 54-7 for the optic-smoke part. |
|
|
|
|
|
|
|
IFS7002
Four Signal Loops |
|
|
|
|
|
|
|
|
RS-LAN
Interface Module The interface module RS-LAN is an auxiliary device for establishment the communication of the fire control panels, manufactured by UniPos with a personal computer through Ethernet network (LAN or internet). The operation of the module is ensured by free software, including not only the installation of virtual COM port in the personal computer but user’s software for the fire control panels . The utilization of the module eliminates the restriction for maximum distance between the site when the networks are organized. |
|
|
|
|
|
|
|
FS5200R
The Repeater is implemented to exchange data and commands with Remote Fire Control Panels. FS5200R: Receives data foe fault condition from Remote Control Panels; Receives data for fire condition from remote control panels; Displays information for the condition from Remote Control Panels; Executes control commands to the Remote Control Panels. The Repeater communicates via RS485 interface with Fire Control Panels FS5100, FS5200, FS5200E, FS5200R, and FS4000 of UniPOS Ltd. Data exchange is realized in compliance with a specialized protocol. The repeater can exchange data with PC or another intelligent device via the same interface. |
|
|
|
|
|
|
|
|
FS6000
The FS6000 Control panel has a modular organization. The basic configuration is equipped with one line Driver Module, which is capable to control 4 fire alarm lines. Each line can operate independently or a pair of lines be grouped in a loop. |
|
|
|
|
|
|
|
Sereies 3000 - FD 3040
Flame Fire Detector The fire detector provides a reliable early warning of a Fire condition upon detecting the infrared emission of the flame. It is suitable for premises, where other type of fire detectors are not applicable. The fire detector complies with the requirements of the European Standard EN 54-10. |
|
|
|
|
|
|
|
|
|
Series 3000
Fire detectors The automatic conventional point fire detectors of series 3000 are remarkable for their state-of-art low profile Design that makes them suitable for the most demanding and prestigious interior. Indication for a Fire condition with two diametrically situated LEDs provides 360** angle visibility. The bases designed and manufactured with care for the installers allow easy installation and provides interchangeability of all detectors types of series. On the base is provided a terminal for convenient connection of a remote indicator. By means of an additional screw the fire detector can be attached to its base. |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3050
Manual Call Point It is designated to release a signal for a Fire condition to the Fire Control Panel upon manual activation by breaking the glass on the place, signed with the arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key. Box color red. It satisfies the requirements of the European Standard EN54-11 for a type of manual call point. Options: extended back box for surface mounting; elastic element; protective cover; breakable seal. |
|
|
|
|
|
|
|
IFS7000 - FD7110
Fixed Temperature Heat Detector The fire detector provides a reliable early warning of a Fire condition upon ambient temperature reaching a fixed temperature threshold. The temperature class (A1S, A2S or BS) is in compliance with the European Standard EN 54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal and high ambient temperature, with possible sudden changes. |
|
|
|
|
|
|
|
|
RL31
LED Remote Indicator |
|
|
|
|
|
|
|
FS6000
The FS6000 Control panel has a modular organization. The basic configuration is equipped with one line Driver Module, which is capable to control 4 fire alarm lines. Each line can operate independently or a pair of lines be grouped in a loop. |
|
|
|
|
|
|
|
|
Series 8000
Fire Detectors The conventional point fire detectors of series 8000 are remarkable for their low profile state-of-art design that makes them suitable for the most demanding and prestigious interior. The indication for a Fire condition provides 360**angle visibility by means of the two diametrically situated LEDs. |
|
|
|
|
|
|
|
Sereies 8000 - FD 8010
Fixed Temperature Heat Detector The fire detector provides a reliable early warning of fire condition upon ambient temperature threshold. It is available in two versions (A2S or BS) depending on the temperature threshold of activation, and in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal or high ambient temperature. with possible sudden changes |
|
|
|
|
|
|
|
|
IFS7000 - FD7120
Rate of Rise Heat Detector The fire detector provides a reliable early warning of a fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN 54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes. |
|
|
|
|
|
|
|
RL31S
Sound Remote Indicator |
|
|
|
|
|
|
|
|
FS6000 - 6120L
Rate of Rise Heat Detector 6120L provides a reliable early warning of a fire condition with or without smoke emissions with minimum risk of false alarms. Detector 6120L activates upon a rate of rise in temperature, higher the specified or upon reaching the fixed temperature threshold of the protected area. The fire detector is available in three versions depending on the temperature class of activation in conformity with the European Standard EN54/5 (Class A2R or BR). Suitable for premises with normal ambient temperature, with out possible sudden changes. |
|
|
|
|
|
|
|
Sereies 8000 - FD 8020
Rate of Rise Heat Detector The fire detector provides a reliable early warning of a Fire condition upon reaching a rate of rise of temperature, higher then the fixed temperature or upon reaching the maximum temperature threshold of the protected premises. It is available in two versions (A2R or BR) depending on the temperature threshold of activation in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal ambient temperature, without sudden changes |
|
|
|
|
|
|
|
|
IFS7000 - FD7130
Optical-Smoke Fire Detector The fire detector provides a reliable early warning of a fire condition responding to fixed threshold smoke concentration detected in the protected premises. The smoke sensitivity (low, middle or high) is in compliance with the European Standard EN 54-7 and it is programmable by Fire Control Panel IFS7002. The fire detector operates with an improved algorithm for self compensation of the public chamber contamination, signaling the necessity for dusting the chamber. |
|
|
|
|
|
|
|
SB112F
Inside siren - plastic box, with flash - 112dB, 16-30V |
|
|
|
|
|
|
|
|
FS6000 - 6130L
Optical-Smoke Detector 6130L provides an early warning of detecting visible or concealed fire, responding to smoke emissions concentration. Upon reaching a fixed threshold level of smoke concentration, the detectors eneters Alarm condition. 6130L complies with the European Standard EN54/7 and by means of its double net structure is effectually protected against insects, high humidity and strong air flow. |
|
|
|
|
|
|
|
Sereies 8000 - FD 8030
Optical-Smoke Fire Detector The fire detector provides a reliable early warning of a Fire condition responding to fixed threshold smoke concentration, detected in the protected premises. Smoke sensitivities factory preset in accordance with the European Standard EN 54-7. The fire detector is controlled by a microprocessor. It operates with an improved algorithm for self-compensation of the optic chamber contamination, signaling the necessity for dusting the chamber . It is performed quickly due to the easy dismantling and assembling of the body cover. The optic chamber construction and the new technology used in manufacturing of the screen provides high level protection against entering dust particles and insects and operation under strong air flow. |
|
|
|
|
|
|
|
|
IFS7000 - FD7150
Manual Call Point It is designed to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place assigned by the arrows. The light indication for activation of the manual call point is provided by ared LED. There is possibility for testing by means of the special key. It satisfies the requirements of the European Standard EN 54-11 for A class manual call point and EN 54-17. |
|
|
|
|
|
|
|
SF110P
Inside siren - 110 dB, 12-24V |
|
|
|
|
|
|
|
|
FS6000 - 6120 & 6130L
Combined Fire Detector 6120 & 6130L provides an early warning of a visible or concealed fire condition, responding to smoke concentration threshold or rate of rise temperature, higher than the specified one, or fixed temperature threshold exceeding. Fire detector 6120 & 6130L combine the advantages of optical smoke and rate of rise heat detectors with low delivery and installation expenses. |
|
|
|
|
|
|
|
Sereies 8000 - FD 8060
Combined Fire Detector The fire detector provides a reliable early warning of a fire condition , responding to fixed threshold smoke concentration or rate of rise of the temperature or fixed temperature threshold detected in the protected remise . It combine the advantages of type FD 8020 and type FD 8030 and it is an attractive option due to decreased expenses for supply and installation. The fire detector complies with the requirements of the European Standard EN 54-5 (temperature class A1R) and EN 54-7 for the optic-smoke part. |
|
|
|
|
|
|
|
|
IFS7000 - FD7160
Combined Fire Detectors The fire detector provides a reliable early warning of a fire condition responding to fixed threshold smoke concentration or rate of rise of the temperature or fixed temperature threshold detected in the protected premises. It combines the advantages of a type FD7120 and a type Fd7130 and it is an attractive option due to decreased expenses for supply and installation. The temperature class (A1R, A2R or BR) and the smoke sensitivity (low, middle or high) are programmable by Fire Control Panel IFS7002 and they are in compliance with the European Standard EN54-5 and 54-7. |
|
|
|
|
|
|
|
SV 2002f
Inside siren - plastic box, with flash - 112dB, 16-30V |
|
|
|
|
|
|
|
|
FS6000 - 6150
Manual Call Point
Satisfies the requirement of the European Standard EN54/11 for a type A manual call point. A test option is provided by the
means of special test key. Upon manual call point activation the red LED is illuminated simultaneously. |
|
|
|
|
|
|
|
FS6000 - 6110L
Fixed Temperature Heat Detector 6110L provides a reliable early warning of a fire condition with or without smoke emissions, with minimum risk of false alarm. The fire detector activates upon exceeding a fixed temperature threshold in the protected area. Fire detector 6110L is available in two versions depending on the temperature threshold of activation in accordance with the European Standard EN54/5 (Class A2S or BS). The fire detector is suitable for premises with high and normal ambient temperature, with possible sudden changes. |
|
|
|
|
|
|
|
|
DNP8
Overvoltage protection |
|
|
|
|
|
|
|
FS6000
The FS6000 Control panel has a modular organization. The basic configuration is equipped with one line Driver Module, which is capable to control 4 fire alarm lines. Each line can operate independently or a pair of lines be grouped in a loop. |
|
|
|
|
|
|
|
|
FS6000 - Instalation Outline Scheme
Of Addressable Fire
Alarm System FS 6000 |
|
|
|
|
|
|
|
FS6000 - 6120L
Rate of Rise Heat Detector 6120L provides a reliable early warning of a fire condition with or without smoke emissions with minimum risk of false alarms. Detector 6120L activates upon a rate of rise in temperature, higher the specified or upon reaching the fixed temperature threshold of the protected area. The fire detector is available in three versions depending on the temperature class of activation in conformity with the European Standard EN54/5 (Class A2R or BR). Suitable for premises with normal ambient temperature, with out possible sudden changes. |
|
|
|
|
|
|
|
|
RM1
Output relay module (8A/250VAC) for connection to a fire control panel 28 DVC otpus |
|
|
|
|
|
|
|
FS6000 - 6120L
Rate of Rise Heat Detector 6120L provides a reliable early warning of a fire condition with or without smoke emissions with minimum risk of false alarms. Detector 6120L activates upon a rate of rise in temperature, higher the specified or upon reaching the fixed temperature threshold of the protected area. The fire detector is available in three versions depending on the temperature class of activation in conformity with the European Standard EN54/5 (Class A2R or BR). Suitable for premises with normal ambient temperature, with out possible sudden changes. |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3010
Fixed Temperature Heat Detector The fire detector provides a reliable early warning of a Fire condition with or without smoke release, when the ambient temperature of the protected area reaches a fixed temperature threshold. It is available in two versions (A2S or BS) depending on the temperature threshold of activation in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal or high ambient temperature, with possible sudden changes. |
|
|
|
|
|
|
|
FS6000 - 6130L
Optical-Smoke Detector 6130L provides an early warning of detecting visible or concealed fire, responding to smoke emissions concentration. Upon reaching a fixed threshold level of smoke concentration, the detectors eneters Alarm condition. 6130L complies with the European Standard EN54/7 and by means of its double net structure is effectually protected against insects, high humidity and strong air flow. |
|
|
|
|
|
|
|
|
RM2
Output relay module (8A/250VAC) for connection to a fire control panel monitored output |
|
|
|
|
|
|
|
FS6000 - 6130L
Optical-Smoke Detector 6130L provides an early warning of detecting visible or concealed fire, responding to smoke emissions concentration. Upon reaching a fixed threshold level of smoke concentration, the detectors eneters Alarm condition. 6130L complies with the European Standard EN54/7 and by means of its double net structure is effectually protected against insects, high humidity and strong air flow. |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3020
Rate Of Rise Heat Detector The fire detector provides a reliable early warming of Fire condition with or without smoke release upon reaching a rate of rise of temperature, higher then the fixed temperature or upon reaching the maximum temperature threshold of the protected premises. It is available in two versions (A2SR or BR) depending on the temperature threshold of activation in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal ambient temperature, without sudden changes. |
|
|
|
|
|
|
|
FS6000 - 6120 & 6130L
Combined Fire Detector 6120 & 6130L provides an early warning of a visible or concealed fire condition, responding to smoke concentration threshold or rate of rise temperature, higher than the specified one, or fixed temperature threshold exceeding. Fire detector 6120 & 6130L combine the advantages of optical smoke and rate of rise heat detectors with low delivery and installation expenses. |
|
|
|
|
|
|
|
|
RM3
Output relay module (8A/250VAC) for connection to a fire control panel remote indicator |
|
|
|
|
|
|
|
FS6000 - 6120 & 6130L
Combined Fire Detector 6120 & 6130L provides an early warning of a visible or concealed fire condition, responding to smoke concentration threshold or rate of rise temperature, higher than the specified one, or fixed temperature threshold exceeding. Fire detector 6120 & 6130L combine the advantages of optical smoke and rate of rise heat detectors with low delivery and installation expenses. |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3030
Optical-Smoke Fire Detector The fire detector provides as reliable early warning of a Fire condition responding to fixed threshold smoke concentration, detected in the protected premises. The construction of the optic chamber and the technology used in manufacturing of the screen, provides high level protection against entering dust particles and insects and operation under strong air flow. The smoke sensitivity is in accordance with the European Standard EN 54-7 |
|
|
|
|
|
|
|
FS6000 - 6150
Manual Call Point
Satisfies the requirement of the European Standard EN54/11 for a type A manual call point. A test option is provided by the
means of special test key. Upon manual call point activation the red LED is illuminated simultaneously. |
|
|
|
|
|
|
|
|
RU4
Output relay module (4 outputs, 8A/250VAC, NO/NC) for connection to a fire control panel |
|
|
|
|
|
|
|
FS6000 - 6150
Manual Call Point
Satisfies the requirement of the European Standard EN54/11 for a type A manual call point. A test option is provided by the
means of special test key. Upon manual call point activation the red LED is illuminated simultaneously. |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3060
Combined Fire Detection The fire detector provides a reliable early warning of a Fire condition, responding to fixed threshold smoke concentration or rate of rise of the temperature or fixed temperature threshold detected in the protected premises. It combines the advantages of type FD 3020 and type FD3030 and it is an attractive option due to decreased expenses for supply and installation. The fire detector complies with the requirement of the European Standard EN 54-5 (temperature class A2R) and EN 54-7 for the optic-smoke part. |
|
|
|
|
|
|
|
FS6000 - Instalation Outline Scheme
Of Addressable Fire
Alarm System FS 6000 |
|
|
|
|
|
|
|
|
RU8
Output relay module (8 outputs, 8A/250VAC, NO/NC) for connection to a fire control panel |
|
|
|
|
|
|
|
FS6000 - Instalation Outline Scheme
Of Addressable Fire
Alarm System FS 6000 |
|
|
|
|
|
|
|
|
Sereies 3000 - FD 3040
Flame Fire Detector The fire detector provides a reliable early warning of a Fire condition upon detecting the infrared emission of the flame. It is suitable for premises, where other type of fire detectors are not applicable. The fire detector complies with the requirements of the European Standard EN 54-10. |
|
|
|
|
|
|
|
VIT 01
Functional Data Signal level control; Wireless devices tamper control; Control over the wireless devices for battery status and power supply status; Changing the parameters of the fire detectors; Recognizing the type of devices and programming the user parameters; Detection of a fault condition (short circuit or interruption) in the controllable outputs; |
|
|
|
|
|
|
|
|
Zener barrier for explosion protection of hazardous areas |
|
|
|
|
|
|
|
Sereies 3000 - FD 3050
Manual Call Point It is designated to release a signal for a Fire condition to the Fire Control Panel upon manual activation by breaking the glass on the place, signed with the arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key. Box color red. It satisfies the requirements of the European Standard EN54-11 for a type of manual call point. Options: extended back box for surface mounting; elastic element; protective cover; breakable seal. |
|
|
|
|
|
|
|
|
VIT 02
Router Router VIT02 performs the functions of a repeater (retransmitting the radio signals in the network) and controls conventional sounders or executive devices. It is power supplied by alternating voltage 220 V/ 5a Hz and has a built in backup battery, supporting its operation in case of fault in the external power supply. |
|
|
|
|
|
|
|
Spare Glass
for FD3050 & FD7150 / 10 pcs. |
|
|
|
|
|
|
|
|
Sereies 8000 - FD 8010
Fixed Temperature Heat Detector The fire detector provides a reliable early warning of fire condition upon ambient temperature threshold. It is available in two versions (A2S or BS) depending on the temperature threshold of activation, and in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal or high ambient temperature. with possible sudden changes |
|
|
|
|
|
|
|
VIT 10
Fixed Temperature Heat Fire Detection |
|
|
|
|
|
|
|
|
Sereies 8000 - FD 8020
Rate of Rise Heat Detector The fire detector provides a reliable early warning of a Fire condition upon reaching a rate of rise of temperature, higher then the fixed temperature or upon reaching the maximum temperature threshold of the protected premises. It is available in two versions (A2R or BR) depending on the temperature threshold of activation in accordance with the European Standard EN 54-5. The fire detector is suitable for premises with normal ambient temperature, without sudden changes |
|
|
|
|
|
|
|
VIT 20
Rate of Rise Heat Fire Detector |
|
|
|
|
|
|
|
|
Sereies 8000 - FD 8030
Optical-Smoke Fire Detector The fire detector provides a reliable early warning of a Fire condition responding to fixed threshold smoke concentration, detected in the protected premises. Smoke sensitivities factory preset in accordance with the European Standard EN 54-7. The fire detector is controlled by a microprocessor. It operates with an improved algorithm for self-compensation of the optic chamber contamination, signaling the necessity for dusting the chamber . It is performed quickly due to the easy dismantling and assembling of the body cover. The optic chamber construction and the new technology used in manufacturing of the screen provides high level protection against entering dust particles and insects and operation under strong air flow. |
|
|
|
|
|
|
|
VIT 30
Optical - Smoke Fire Detector |
|
|
|
|
|
|
|
|
Sereies 8000 - FD 8060
Combined Fire Detector The fire detector provides a reliable early warning of a fire condition , responding to fixed threshold smoke concentration or rate of rise of the temperature or fixed temperature threshold detected in the protected remise . It combine the advantages of type FD 8020 and type FD 8030 and it is an attractive option due to decreased expenses for supply and installation. The fire detector complies with the requirements of the European Standard EN 54-5 (temperature class A1R) and EN 54-7 for the optic-smoke part. |
|
|
|
|
|
|
|
|
|
VIT 60
Combined Fire Detector |
|
|